New Commercial Asphalt Paving — Houston TX
Asphalt Paving Houston TX
New parking lots, commercial driveways, and access roads built to last in Houston’s demanding climate. From subgrade to final compaction — done right the first time.
The Problem
A Cheap Paving Job Costs More in the Long Run
New asphalt paving looks the same on day one whether it’s done right or done cheap. The difference shows up at year 3, year 5, year 10 — when the base fails, the drainage fails, and you’re back to paying for repairs that shouldn’t have been necessary.
In Houston, subgrade preparation is everything. The expansive clay soils, drainage demands, and intense heat cycles punish shortcuts. A properly engineered pavement system — the right base thickness, the right mix, the right compaction — lasts 20+ years. A cheap one lasts 5.
Poor subgrade prep is the #1 cause of premature pavement failure in Houston
Incorrect drainage design turns new lots into standing water problems
Undersized base layers fail under load — especially with heavy commercial traffic
Low-bid contractors use thinner lifts and skip proper compaction testing
Your Guide
We Engineer Parking Lots for Houston. Not Just Anywhere — Houston.
Every new paving project starts with a site assessment, grading analysis, and drainage evaluation. We design pavement systems that account for Houston’s specific soil conditions, heat cycles, and traffic loads — not a generic spec from a catalog.
From small commercial driveways to large multi-acre parking lots, Pelagic Paving brings the equipment, materials, and expertise to build it right the first time. No subcontracting, no cutting corners, no disappearing crews.
- Soil assessment and subgrade preparation before any asphalt goes down
- Proper base thickness design for load and traffic type
- TxDOT-spec hot-mix asphalt for durability in Houston heat
- Full compaction testing and quality control
- Licensed, bonded & fully insured in Texas
The Plan
What's Included
A complete new paving installation from Pelagic Paving includes every phase — from earthwork to finished surface.
Site Grading & Earthwork
Proper grade establishment for positive drainage. Critical for Houston rain events and long-term pavement health.
Subgrade Stabilization
Lime or cement stabilization of clay subgrades where needed to create a stable foundation for the pavement structure.
Base Course Installation
Properly designed base depth installed and compacted in lifts — the foundation of a long-lasting pavement system.
Hot-Mix Asphalt Surface
TxDOT-spec hot-mix asphalt placed and compacted to achieve density and surface smoothness.
Drainage Integration
Inlet protection, curbing, and grade design coordinated for effective stormwater management.
Striping & Signage
Layout design, line striping, and ADA-compliant signage included or available as an add-on to complete the project.
How It Works
Our Process
Simple, transparent, and stress-free from first call to final walkthrough.
Design & Estimate
Site visit, grade analysis, drainage review, and a detailed written estimate — all free, no obligation.
Subgrade & Base
Earthwork, grading, and base installation. The phase that determines everything about your pavement's lifespan.
Paving
Hot-mix asphalt placed and compacted by our experienced crew using calibrated paving equipment.
Finishing & Striping
Edges, transitions, striping, and signage completed. Property returned to full service.
FAQ
Common Questions About Asphalt Paving
How long does new asphalt paving last in Houston?
With proper installation and regular maintenance (sealcoating every 2–3 years, crack sealing), commercial asphalt in Houston can last 25–30 years. The key is starting with a correctly engineered base.
What thickness does my parking lot need?
It depends on traffic loads. Standard passenger vehicle lots typically use 6″ aggregate base + 2″ surface course. Heavy truck areas require 8–12″ base and thicker surface lifts. We design each project to the actual load requirements.
How long does a new parking lot take to construct?
A typical commercial parking lot (20,000–50,000 sq ft) takes 3–7 days for the full installation sequence, weather permitting. Larger projects scale accordingly. We provide a detailed schedule before mobilizing.
Do you handle permits and engineering drawings?
For most maintenance and repair work, no permits are required. For new construction, we coordinate with your civil engineer or can refer you to trusted local firms. We handle the paving scope regardless.
Can you pave in sections while keeping part of the lot open?
Yes. We regularly phase commercial paving projects to keep portions of lots operational during construction. This requires careful planning — let us walk your site and recommend the best approach.
Ready to Get Started?
Call us or request a free estimate online. We respond within 24 hours with a clear, honest quote — no pressure, no obligation.